Selected Publications (Updated on October 2017)
Book Chapters:
Zahari Taha and Indro Pranoto (2013). Acoustic Emission Application for Monitoring Bearing Defects, Acoustic Emission – Research and Applications, Dr. Wojciech Sikorski (Ed.), ISBN: 978-953-51-1015-6, InTech, DOI: 10.5772/55434.
Journal Papers and Proceedings:
Wiranata, A., Pranoto, I., Mitakusuma, W.H., Deendarlianto, Kamal, S., “Experimental study on the effect of multiple droplet frequency and Weber number to spreading ratio of multiple droplets on a horizontal surface”, 2016 6th International Annual Engineering Seminar (InAES) IEEE Xplore, CFP16F83-ART, 2017.
Wiranata, A., Pranoto, I., Mitakusuma, W.H., Deendarlianto, Kamal, S., “Experimental study on the effect of surface temperature and Weber number to spreading ratio of multiple droplets on a horizontal surface”, American Institute of Physics Conference Proceedings, 1737, 040003, 2016.
Dharma, I.A., Arffan, F., Prambudi, A.R., Widyaparaga, A., Pranoto, I., Khasani, “Development of liquid-liquid cylindrical cyclone (LLCC) separator for oil-water separation”, American Institute of Physics Conference Proceedings, 1737, 040003, 2016.
Pranoto, I., Leong, K.C., “An Experimental study of flow boiling heat transfer from porous foam structures in a channel”, Applied Thermal Engineering, 70, pp. 100-114, 2014.
Pranoto, I., Yang, C., Zheng, L.X., Leong, K.C., and Chan, P.K., “Flow boiling heat transfer enhancement from carbon nanotube-enhanced surfaces”, Defect and Diffusion Forum, 348, pp. 20-26, 2013.
Pranoto, I., Leong, K.C., Jin, L.W., “The role of graphite foam pore structure on saturated pool boiling enhancement”, Applied Thermal Engineering, Vol. 42, pp. 163-172, 2012.
Jin, L.W., Leong, K.C., Pranoto, I., “Saturated pool boiling heat transfer from highly conductive graphite foams”, Applied Thermal Engineering, Vol. 31, pp. 2685-93, 2011.
Jin, L.W., Leong, K.C., Pranoto, I., Li, H.Y., and Chai, J.C., “Experimental study of a two-phase thermosyphon with porous graphite foam insert”, ASME Journal of Thermal Science and Engineering Applications, Vol. 3, No.2, pp.024502-1 – 024502-6, 2011.
Leong, K.C., Jin, L.W., Pranoto, I., Li. H.Y., and Chai, J.C., “Experimental study of enhanced pool boiling heat transfer using graphite foam inserts”, Defect and Diffusion Forum, Vols. 312-315, pp. 352-57, 2011.
Indro Pranoto, Zahari Taha, Kimiyuki Mitsui and Subagyo, “Ball bearing defects monitoring using acoustic emission sensor”, International Journal for Manufacturing Science and Technology, Vol. 10(2) p.39, 2007.
Conferences:
2017
Dannys, A.K., Pranoto, I., Riswanda, A., Deendarlianto, Wibowo, T., Fauzun, Studi Experimental Pengaruh Frekuensi Tetesan Terhadap Laju Penurunan Temperatur Permukaan dan Efektifitas Pendinginan pada Multiple Droplet, 16th Annual National Seminar on Mechanical Engineering, Surabaya, 5-6 October 2017, Surabaya, Indonesia.
Riswanda, A., Pranoto, I., Wibowo, T., Deendarlianto, Indarto, Fauzun, Study on The Effect of Weber Number to Heat Transfer of Multiple Droplets on Hot Stainless Steel Surface, 2nd International Conference on Engineering and Technology for Sustainable Development (ICET4SD), Yogyakarta, Indonesia, 13-14 September 2017.
2016
A. Wiranata, Fikri Meitri M., W.H. Mitrakusuma, I. Pranoto, Deendarlianto, “Studi Asesment Penggunaan Teknik Image Processing untuk Pengukuran Diameter Droplet pada Peristiwa Tumbukan Multiple Droplets di atas Permukaan Datar, 8th National Symposium on Thermofluids, 10th November 2016, Yogyakarta, Indonesia.
D.A. Kusuma, I. Pranoto, W.H. Mitrakusuma, Deendarlianto, Samsul Kamal, “Studi Eksperimental Pengaruh Tetesan Therhadap Efektifitas Pendinginan pada Multiple Droplet, 8th National Symposium on Thermofluids, 10th November 2016, Yogyakarta, Indonesia.
A. Riswanda, I. Pranoto, Deendarlianto, W.H. Mitrakusuma, Samsul Kamal, “Studi Eksperimental Pengaruh Bilangan Weber Terhadap Efektifitas Pendinginan pada Multiple Droplets yang Menumbuk Permukaan Stainless Steel pada Rejim Natural Convection, 8th National Symposium on Thermofluids, 10th November 2016, Yogyakarta, Indonesia.
I. Pranoto, “Boiling Phenomena and Bubble Dynamics from Porous Graphite Foam”, 15th Annual National Seminar on Mechanical Engineering, 5-7 October 2016, Bandung, Indonesia.
2015
Wiranata, A., Pranoto, I., Mitrakusuma, W.M., Deendarlianto, Kamal, S., “Experimental Study on the Effect of Surface Temperature and Weber Number to Spreading Ratio of Multiple Droplets on a Horizontal Surface”, 7th International Conference of Thermofluids, November 19-20, 2015, Yogyakarta, Indonesia.
Dharma, I.A., Arffan, F., Prambudi,R., Widyaparaga, A., Pranoto, I., Khasani, “Development of Liquid-Liquid Cylindrical Cyclone (LLCC) Separator for Oil-Water Separation”, 7th International Conference of Thermofluids, November 19-20, 2015, Yogyakarta, Indonesia.
Imaduddin, M.H., Pranoto, I., Sudarja, Deendarlianto, Indarto, “Air-Water Two Phase Flow and Transition Phenomenon in Capillary Channel: An Experimental Investigation”, International Conference on Science and Technology, November 11-12, 2015 Yogyakarta.
Saka, A., Fauzun, Pranoto, I. “Tinjuan analitik konveksi paksa untuk aliran laminar berkembang penuh dalam saluran segiempat dengan syarat batas fluks panas seragam”, Seminar Nasional Perkembangan Riset dan Teknologi di Bidang Industri ke-21, Juni 1, 2015, Yogyakarta, Indonesia.
2014
Dharma, I. , Wirayoga, W. A., Widyaparaga, A., Pranoto, I., Khasani, “Pengembangan Liquid-Liquid Cylindrical Cyclone (LLCC) separator untuk pemisahan campuran minyak-air, 13rd Annual National Seminar of Mechanical Engineering (SNTTM XIII), October 15 -16, 2014, Depok, Jawa Barat, Indonesia.
Ho, J.Y., Leong, K.C., Yang, , Pranoto, I., “An experimental study of carbon nanotube coatings for pool boiling heat transfer enhancement”, 15th International Heat Transfer Conference, IHTC-15, August 10-15, 2014, Kyoto, Japan.
2013
Pranoto, I., Yang, C., Zheng, L.X., Leong, K.C., Chan, P.K., “Flow boiling heat transfer enhancement from carbon nanotube-enhanced surfaces”, 9th International Conference on Diffusion in Solids and Liquids, DSL 2013, 24 – 28 June 2013, Madrid, Spain.
2012
Pranoto, I., Leong K.C., “Experimental study of enhanced flow boiling heat transfer and bubble dynamics from porous graphite foam structures”, The 8th International Symposium on Heat Transfer ISHT-8, October 21-24, 2012, Beijing, China.
2010 – 2011
Pranoto, , Leong, K.C., Jin, L.W. “Flow boiling heat transfer of saturated FC-72 from an evaporator channel with porous graphite foam inserts”, 9th Australasian Heat and Mass Transfer Conference 9AHMTC, November 2-4, 2011, Melbourne, Australia.
Jin, L.W., Pranoto, I., Leong, K.C. and Chai, J.C., “Parametric study of pool boiling from porous graphite foams in dielectric liquids”, 3rd International Conference on Thermal Issues in Emerging Technologies ThETA 3, December 19-22, 2010, Cairo, Egypt.
Leong, K.C., Jin, L.W., Pranoto, I., Li, H.Y., Chai, J.C., “Experimental study of a two-phase thermosyphon with porous graphite foam insert”, 14th International Heat Transfer Conference IHTC-14, August 8-13, 2010, Washington, DC, USA.
Leong, K.C., Jin, L.W., Pranoto, I., Li. H.Y. and Chai, J.C., “Experimental study of enhanced pool boiling heat transfer using graphite foam inserts”, 6th International Conference on Diffusion in Solids and Liquids DSL-2010, July 5-7, 2010, Paris, France.
2006 – 2009
Pranoto Indro, Taha Zahari, Mitsui Kimiyuki, Subagyo, “Ball Bearing Defects Monitoring Using Acoustic Emission Sensor”, Third Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management International Conference 3rd HNICEM, March 15-17, 2007, Manila, Philippines.
Pranoto Indro, Taha Zahari, Mitsui Kimiyuki, “Acoustic Emission Application for Monitoring Bearing Defects”, 9th Field Wise Seminar (FWS) on Manufacturing Systems AUN/Seed-Net JICA, February 5-6, 2007, Kuala Lumpur, Malaysia.
Pranoto Indro, Taha Zahari, Mitsui Kimiyuki, Subagyo, “Acoustic Emission Analysis for Bearing Defects Monitoring”, International Product Design and Development (IPDD) Seminar, December 13-14, 2006, Yogyakarta, Indonesia.
Pranoto Indro, Taha Zahari, Mitsui Kimiyuki, “Online Monitoring of Bearing Defects Using Acoustic Emission Application”, 1st International Conference on Manufacturing and Material Processing (ICMM) and 7th Field Wise Seminar (FWS) AUN/Seed-Net JICA, March 14-15, 2006, Kuala Lumpur, Malaysia.