(16th UK Heat Transfer Conference, Nottingham University, September 2019)
ACADEMIC, RESEARCH AND PROJECT INVOLVEMENT
(Activity/Project tittle), (Role), (Organizations involved), (Year).
Hibah Penelitian Dan Pengabdian Kepada Masyarakat Pendidikan Tinggi Vokasi, Reviewer, Direktorat Jenderal Pendidikan Vokasi, 2024.
Akreditasi Mutu Internal (AMI) Universitas Gadjah Mada, Auditor, Fakultas Teknik UGM, 2023.
Seleksi Beasiswa LPDP, Kementerian Keuangan Republik Indonesia, Reviewer Akademik, 2023.
The International Conference on Science and Engineering (ICSE) 2023, Reviewer, UIN Sunan Kalijaga Yogya, 7-9 Agustus 2023.
4th Mechanical Engineering Joint Symposium, Invited Speaker, ITB, UGM, UI, Universitas Pertamina, President University, 10 Agustus 2023.
Mechanical Engineering and Emerging Techology Conference (MEET-n-Conf), Reviewer, Agustus 2023.
Pendampingan Penulisan Makalah SPKI dan STEM Meet UP, Narasumber, PT. PLN Indonesia Power dan UGM, 2022-2023.
2nd International Symposium on Aerospace Engineering and Systems (ISAES 2023), Technical Commitee, Nanjing, China, 19 – 21 Mei 2023.
The Research Catalyst’s MechResCon2023 (Mechanical & Automotive Engineering Conference), Invited Speaker, Rome, Italy 23 – 25 March 2023.
Seleksi wawancara penerima beasiswa KNB Universitas Gadjah Mada, Interviewer, 2022-2023.
Task Force Tim Akreditasi LAM Teknik Program Studi Doktoral Teknik Mesin, DTMI FT, Universitas Gadjah Mada, Anggota, 2022-2023.
Tim Penyusun Proposal Program Kerjasama Pendidikan DAAD, Departemen Teknik Mesin dan Industri, Universitas Gadjah Mada, Anggota, 2022-2023.
Tim Asesor Beban Kerja Dosen Universitas Gadjah Mada, Asesor, 2022-2023.
Tim Implementasi Kurikulum 2022 Program Studi Magister Teknik Mesin, Universitas Gadjah Mada, Ketua, 2022.
Tim Penyusun Kurikulum 2022 Program Studi Doktoral Teknik Mesin, Universitas Gadjah Mada, Anggota, 2021 – 2022.
Tim Penyusun Kurikulum 2022 Program Studi Magister Teknik Mesin, Universitas Gadjah Mada, Ketua, 2021 – 2022.
The 15th Regional Conference on Energy Engineering (RCEneE 2022) and The 13th International Conference on Thermofluids 2022, Committee, Moderator, Reviewer, 2022.
Program Kompetisi Kampus Merdeka (PKKM) Program Studi Teknik Mesin, Universitas Gadjah Mada, Anggota, 2021.
Kuliah Tamu Mechanical Engineering, Sampoerna University, Narasumber, 2021.
5th Mechanical Engineering and Emerging Technology Conference, Yogyakarta Indonesia, Committee and Reviewer, 2022.
Tim Penyusun Kurikulum Magister Berbasis Penelitian 2021 Program Studi Magister Teknik Mesin, Universitas Gadjah Mada, Ketua, 2021 – 2022.
Tim Bangunan Hijau (Green Building Team) PIU UGM, Sekretaris, Januari – Desember 2021.
Proyek Kerjasama Pengujian B-100 pada Mesin Genset PT. KAI, Anggota Peneliti, November 2020 – Februari 2021.
Pelatihan ASHRAE berjudul : Designing & Operating Data Centers for the Internet of Everything: Mitigating Risk & Optimizing Performance, ASHRAE Global Training Center, Peserta, 16 dan 19 November 2020.
11th International Conference of Thermofluids 2020, Department of Mechanical and Industrial Engineering, Gadjah Mada University, Moderator for Keynote Speaker, 11th November 2020.
11th International Conference of Thermofluids 2020, Department of Mechanical and Industrial Engineering, Gadjah Mada University, Reviewer, 11th November 2020.
11th International Conference of Thermofluids 2020, Department of Mechanical and Industrial Engineering, Gadjah Mada University, Organizer, 11th November 2020.
Insinyur Profesional Madya (IPM), Persatuan Insinyur Indonesia, November 2020.
Pelatihan Audit Energi #2, Project Implementation Unit (PIU) Universitas Gadjah Mada, Peserta, November 2020.
Pelatihan Audit Energi #1, Project Implementation Unit (PIU) Universitas Gadjah Mada, Peserta, November 2020.
Tim Bangunan Hijau, Project Implementation Unit (PIU) Universitas Gadjah Mada, Sekretaris, Februari – Desember 2020.
Penyusunan Kurikulum Program Studi S1 Teknik Mesin, FT UGM, Anggota, 2019 – 2020.
Program Pengabdian Masyarakat dan KKN PPM UGM di Kampung Terban Yogyakarta, Ketua, April – November 2020.
Pembahasan Rencana Kerja, Loka Riset Mekanisasi Pengolahan Hasil Perikanan (LRMPHP) Yogyakarta, Evaluator, LRMPHP Kementerian KKP, Yogyakarta, 13 Februari 2020.
Program Pengabdian Masyarakat untuk Desain dan Rancang Bangun Mesin Pengering Sohun, Peneliti, Kebumen, Jawa Tengah, April – November 2020.
Indonesia Journal of Computing and Design (IJoCED) Sampoerna University, Reviewer, Januari 2020.
CIEHIS Conference, Reviewer, UIN Sunan Kalijaga, 2019
Green Professional Training and Certification, Peserta, Green Building Council Indonesia, Jakarta, 4-8 Nopember 2019.
Green Associate Training, Peserta, Green Building Council Indonesia, Denpasar, 12 – 13 Oktober 2019.
10th International Conference of Thermofluids 2019, Organizing Committee and Editor, Gadjah Mada University, 2019.
16th UK Heat Transfer Conference, Presenter, Nottingham University, 8 – 10 September, 2019.
World Class Scholar Symposium SCKD 2019, Peserta, Dirjen Dikti, Jakarta, 23 -24 Agustus 2019.
Forum Fasilitas Produksi Migas 2019, Peserta, SKK Migas dan IAFMI, Semarang, 9-11 Juli 2019.
Tim Penyusun Kurikulum Program Studi Teknik Mesin DTMI FT UGM, Anggota, UGM, 2019.
ICST Conference, Reviewer, Gadjah Mada University, 2019.
Sekolah DPL UGM, Peserta, Gadjah Mada University, 2019.
Hibah Publikasi Prosiding Seminar Internasional terindeks Scopus UGM, Pemenang, Gadjah Mada University, 2018.
Jurnal Ilmiah Ketenagalistrikan dan Energi Terbarukan, Reviewer, Kementerian ESDM, 2018.
ICST International Conference, Reviewer, UGM, 2018
Proceedings of 9th Internaional Conference on Thermofluids 2019, American Institute of Physics (AIP) Publishing, Chief Editor, 2018.
Industrial Visits and Academic Collaboration Program, Peserta, Mechanical and Industrial Engineering Department UGM, 2018.
Pelatihan Industrial Flow Measurement System, Instructor, Heat and Mass Transfer Lab UGM, 2018.
Pendidikan Program Studi Insinyur Profesional, Peserta, Fakultas Teknik UGM, 2018.
Feasibility Study of 1×50 MW Coal Fired Power Plant Sumbawa 2, Mechanical Engineer, PUSENLIS PLN-PSE UGM, 2018.
Feasibility Study of 2×50 MW (Extented Project) Coal Fired Power Plant Sumbawa 2, Project Leader, PUSENLIS PLN-PSE UGM, 2018.
Jurnal Ilmiah Ketenagalistrikan dan Energi Terbarukan, Reviewer, Kementerian ESDM, Mulai Desember 2017.
Hibah Inovasi Loka Riset Mekanisasi Pengolahan Hasil Perikanan, Program Evaluator, LRMPHP Kementrian Kelautan dan Perikanan, Desember 2017.
Hibah Inovasi Tenaga Kependidikan Fakultas Teknik UGM, Reviewer, Fakultas Teknik UGM, November 2017.
Mechanical Engineering Design Competition (MEDCOM 2017) Seminar, Moderator, Department of Mechanical and Industrial Engineering FT UGM, Yogyakarta, 19 November 2017.
9th International Conference on Thermofluids 2017, Chair of Organizing Committee and Proceedings’ Chief Editor, Department of Mechanical and Industrial Engineering FT UGM Yogyakarta, 9-10 November 2017.
Seminar Akademik Pendidikan Teknik Mesin di Asia Tenggara, Narasumber, Fakultas Teknik Universitas Tidar Magelang, 27 Oktober 2017.
Focus Group Discussion dengan Tim Advisory Board Program Studi TM FT UGM dengan Pengurus dan Task Force ABET, Anggota, Jakarta, 14 Oktober 2017.
Seminar Nasional Tahunan Teknik Mesin (SNTTM) ke 16, ITS Surabaya, Author, 5-6 October 2017.
Lomba Rancang Bangun Teknik Mesin, Judul: Hofoling:Horizontal Flow Boiling, Dosen Pembimbing, BKSTM dan ITS, Oktober 2017.
Focus Group Discussion between ABET Task Force of ME Program Study and Alumnae for, Task Force Member, September, 2017
Focus Group Discussion between ABET Task Force of ME Program Study and Advisory Board Member, Task Force Member and Notulis, Department of Mechanical and Industrial Engineering FT UGM, September, 2017
General Lecture on Ice Breaking Collaboration Between Gadjah Mada University-Yamagata University Japan, Moderator, August 2017.
Feasibility Study of 2×50 MW Coal Fired Power Plant Sumbawa 2, Mechanical Engineer, PUSENLIS PLN-PSE UGM, May-August 2017.
Mechanical Engineering (TM 2015) Industrial Visits to PT. Krakatau Steel Group, Toyota Motor Manufacturing Indonesia, PT. Astra Honda Motor, PT. Pembangkitan Jawa Bali UP Muara Karang, Dosen Pendamping, August 2017.
Accreditation Board for Engineering and Technology for Mechanical Engineering Study Program Preparation, Task Force, UGM, 2016-2017.
National Symposium on Thermofluids VIII 2016, Chair, UGM, 10 November 2016
Penyusunan SOP dan TOR Serah Terima Bahan bakar Minyak BBM, Mechanical Engineer, Pusat Studi Energi (PSE) dan PT. PLN, April-Juni 2016.
Studium General, Mechanical Engineering Study Program UGM dan Komatsu Ltd. Japan, Moderator, 16 Maret 2016.
Persiapan Akreditasi Nasional Program Studi S2 Teknik Mesin FT UGM, Task Force, UGM, 2016.
7th International Conference of Thermofluids and 3rd Regional Conference on Energy Engineering, Moderator, UGM-AUN/Seed-Net JICA, 2015.
7th International Conference of Thermofluids and 3rd Regional Conference on Energy Engineering, Secretary, UGM-AUN/Seed-Net JICA, 2015.
Pelatihan Penelitian dan Pengabdian Kepada Masyarakat, UGM-STITEKNAS Jambi, Instruktur, 2015.
Persiapan Akreditasi Nasional Program Studi Doktor Teknik Mesin FT UGM, Task Force, UGM, 2015
Hibah Persiapan Akreditasi Internasional Program Studi, Task Force, UGM, 2015.
Hibah Rencana Induk Akademik Program Studi, Task Force, UGM, 2015
Kontes Robot Terbang Indonesia (KRTI), Secretary, KEMRISTEKDIKTI-UGM, 2015.
AUN Quality Assurance Accreditation for Study Program of Mechanical Engineering UGM, Task Force, UGM, 2014.
Industrial Ecology Workshop, Moderator, UGM, 2014.
National Seminar of Thermofluids VI, Moderator, UGM, 2014
Kongres Energi Nasional ke-2, Chairman, UGM, 2014.
Training Support for Young Lecturer on Japanese Way of MOT (Management of Technology), UGM Delegator, Komatsu Ltd. Japan, 2014.
Certified Energy Manager (CEM) Training Batch-2, Trainer, Pusat Studi Energi (PSE) UGM and TUV-Nord Indonesia, 2014.
Certified Energy Manager (CEM) Training Batch-1, Trainer, Pusat Studi Energi (PSE) UGM and TUV-Nord Indonesia, 2014.
Certified Energy Manager (CEM) Training for Trainer, Participant, TUV-Nord Indonesia, Himpunan Ahli Konservasi Energi (HAKE) and PSE UGM, 2014.
Nanostructures Surface Enhance Boiling for Advanced Cooling, Research Associate, MINDEF-Nanyang Technological University Singapore, 2011- 2013.
Study of Two-Phase Cooling Systems for Densely-Packed Electronic Packages, Researcher, DSTA-Nanyang Technological University Singapore, 2008-2010.
Medium Scale Biomass Power Plant Project, Researcher, Gadjah Mada University and Regional Government State of Yogyakarta Indonesia, 2007.
Technical Training on the Refrigeration and AC System for the Selected Company’s Technician in Yogyakarta Indonesia, Trainer, Gadjah Mada University, UNDP and Ministry of Environment Indonesia, 2007.
Engineering Training on the Refrigeration and AC System for the Engineer and Technician of PT. Badak NGL Bontang Indonesia, Trainer, PT. Badak NGL Bontang and Gadjah Mada University, 2007.
Energy Audit for Tenaga Nasional Berhard (TNB) Malaysia, Engineering Auditor, Faculty of Engineering, University of Malaya, 2006
Online Monitoring of Bearing Defects Using Acoustics Emission Sensor, Project Investigator, University of Malaya, Keio University and AUN/Seed-Net JICA, 2005-2007.
Design of Coal Fire Power Plant 2 x 7 MW Sangatta East Kalimantan, Mechanical Engineer, PT. Advance Technology Indonesia and Engineering Center BPPT Indonesia, 2004-2005.
PID of Co2 Removable Gas Transfer Facility Drawing Musi Barat Sumbagsel Indonesia, PDS Engineer, PT. Rekayasa Industri and Engineering Center BPPT Indonesia, 2005.