Graduate Students:
Mustaza Ma’a (S3 Teknik Mesin 2019)
Heat Transfer Enhancement of Heat Exchanger with Outsert Introduction (On Going)
Septian Jamaluddin Zakky (S2 Teknik Mesin 2020 Program Reguler Khusus)
Study on the Compressor Performance Enhancement (On Going)
Pradhana Adhi Prasidha Mahardhika (S2 Teknik Mesin 2020 Fast Track Program)
Pool Boiling Heat Transfer Correlations and Phenomena from Enhanced Fins Structure with Dielectric Liquids (On Going)
Cahya Dhika Wicaksana (S2 Teknik Mesin 2020 Fast Track Program)
Flow Boiling Performance and Phenomena from Enhanced Fins Structure with Dielectric Liquids (On Going)
Yohannes Ragil Purnomo (S2-TM 2018)
Pool Boiling Heat Transfer From Modified Surface of Fins Structures with Orientation Angle (Completed, Jan 2022)
Yusuf Yunus (S2-TM 2019)
Thermal-Hydraulic Performance of Serpentine Mini-Channel Liquid Cold-Plate (Completed, Jan 2022)
Ignatius Yan Rosario (S2 TM 2018)
Pool Boiling Heat Transfer From Modified Surface of Fins Structures (Completed 2021)
Dannys Arif Kusuma (S2-TM 15)
Study on the Effects of Droplet Frequency to Heat Transfer Phenomena in Multiple droplets on a Stainless Steel Surface, Supervisor: Dr. Fauzun, December 2017. Fast Track Program)– Completed.
Aria Riswanda (S2-TM 15)
Study on the Effects of Weber Number to Heat Transfer Phenomena in Multiple droplets on a Stainless Steel Surface, Supervisor: Dr. Fauzun, December 2017. Fast Track Program)– Completed.
Ardi Wiranata (S2-TM 14)
Studi Analitis Pengaruh Suhu Permukaan Terhadap Quassi Static Advancing Contact Angle dan Spreading Factor Pada Permukaan Stainless Steel, Co-Supervisor: Dr. Deendarlianto, 2016. (Fast Track Program)-Completed.
Irfan Aditya Dharma (S2-TM 13)
Experimental and Numerical Study on the Performance Evaluation of a Liquid-Liquid Cylindrical Cyclone (LLCC) for Oil and Water Separation, Supervisor: Dr. Adhika Widyaparaga, December 2015. (Fast Track Program)-Completed.
Aji Saka (S2-TM 12)
Tinjauan Analitik Bilangan Nusselt Perpindahan Kalor Konveksi Paksa H2 Untuk Aliran Laminar Berkembang Penuh Dalam Saluran Segiempat, Supervisor: Dr. Fauzun, July 2015. Completed.
Undergraduate Students:
Purnomo Aji Bayu Pamungkas (S1 Teknik Mesin 2016)
Rancang Bangun dan Pengujian Fasilitas Eksperimen Pool Boiling (Completed).
Fahmi Handyan Arko (S1 Teknik Mesin 2015)
Rancang Bangun Fasilitas Eksperimen Pool Boiling Dengan Variasi Sudut Orientasi (Completed).
Radiant Farouk Alpicha (S1 Teknik Mesin 2016)
Studi Eksperimen Flow Boiling pada Kanal Horizontal (Completed).
Farhan Alrosad Munir (S1 Teknik Mesin 2016)
Perancangan Sistem Pendingin Mini Liquid Cold-Plate (Completed).
Abdurrohman Ahmad Rofiq (S1 Teknik Mesin 2014)
Rancang Bangun Fasilitas Eksperimen dan Instrumentasi Pool Boiling (Completed).
Hannan Makarim Arroisi (S1 Teknik Mesin 2014)
Rancang Bangun Fasilitas Eksperimen dan Instrumentasi Flow Boiling (Completed).
Adhimukti Wibowo (S1 Teknik Mesin 2014)
Rancang Bangun Sistem Pendingin Baterai Listrik Mobil Arjuna UGM (Completed).
Edo Samual Tinambunan (S1 Teknik Mesin 2014)
Rancang Bangun Fasilitas Eksperimen Flow Boiling (Completed)
Nia Dewi Rahmawati (S1 Teknik Mesin 2014)
Perancangan Fasilitas Uji Konveksi Paksa Udara Pada Kanal Horizontal (Completed)
Muhammad Dimyati Nashrullah (S1 Teknik Mesin 2014)
Rancang Bangun Fasilitas Eksperimen Pool Boiling (Completed)
Umar Fadhil Ramadhan (S1 Teknik Mesin 2014)
Perancangan Fasilitas Uji Pool Boiling (Completed)
Muhamad Aulia Rahman ( S1 Teknik Mesin 2014)
Perancangan Fasiltas Eksperimen Pool Boiling Dengan Orientasi (Completed)
Elius Salmon Sinabariba (S1 Teknik Mesin 2014)
Perancangan Fasilitas Eksperimen Flow Boiling (Completed)
Muhammad Habtry ( S1 TM 13)
Perancangan Fasilitas Eksperimen Pool Boiling Untuk Sistem Pendingin Lanjut, July 2017, Completed.
Rizki Aditia (TM 13)
Perancangan Alat Uji Flow Boiling Untuk Sistem Pendinginan Lanjut Pada Kanal Vertikal, July 2017, Completed.
Gregorius Bagus Prasetyo (TM 13)
Perancangan Fasilitas Eksperimen Flow Boiling Untuk Sistem Pendingin Lanjut pada Kanal Horizontal, July 2017, Completed.
Anggita Indra Maulana (TM 10)
Menghitung Performa Heat Exchanger Tipe Shell and Tube HE 011-E-105 Pada Unit CDU II PT. Pertamina RU IV Cilacap, July 2017, Completed.
Novata Zaka Rohmana (TM 12)
Pengaruh Jenis Breather dan Tekanan Vakum pada Pembuatan Fuselage Pesawat Tanpa Awak Menggunakan Metode Vacuum Bagging, Completed, November 2016, Collaboration with Dr. Gesang Nugroho.
Faqih Ailani Ashmi (TM 12)
Desain Mini Cold Storage Tenaga Surya untuk Nelayan Tradisional, Completed, October 2016.
Dannys Arif Kusuma (TM 12)
Studi Eksperimental Pengaruh Frekuensi Tetesan terhadap Efektivitas Pendinginan pada Multiple Droplets yang Menumbuk Permukaan Stainless Steel, Completed, October 2016. Collaboration with Prof. Samsul Kamal and Dr. Deendarlianto.
Aria Riswanda (TM 12)
Studi Eksperimental Pengaruh Bilangan Weber terhadap Efektivitas Pendinginan pada Multiple Droplets yang Menumbuk Permukaan Stainless Steel pada Rejim Natural Convection, Completed, July 2016. Collaboration with Prof. Samsul Kamal and Dr. Deendarlianto.
Dimas Ferly (TM 11)
Studi Penurunan Tekanan Aliran Dua fase Udara-Aquades/Gliserin Pada Saluran Mini Horizontal, Completed, February 2016. Collaboration with Prof Indarto and Dr. Deendarlianto.
Diko Anutup (TM 11)
Studi Visualisasi Pola Aliran dan Peta Pola Aliran Dua fase Udara-Aquades/Gliserin Pada Saluran Mini Horizontal Berukuran 1,6 mm, Completed, December 2015. Collaboration with Prof Indarto and Dr. Deendarlianto.
Ardi Wiranata (TM 11)
Studi Visualisasi Dinamika Tumbukan Multiple Droplet Pada Permukaan Stainless Steel Bersuhu Tinggi Dengan Bilangan Weber Rendah, Completed, August 2015. Collaboration with Prof Indarto and Dr. Deendarlianto.
Muhammad Hassan Imaduddin (TM 11)
Analisa Pola Aliran Dua Fasa Fluida Air-Udara Pada Saluran Mini Horizontal, Completed, September 2015. Collaboration with Prof Indarto and Dr. Deendarlianto.
Irfan Aditya Dharma (TM 10)
Studi Eksperimental Pemisahan Air dan Minyak Tanah (Kerosene) dalam Liquid-Liquid Cylindrical Cyclone (LLCC), Completed, August 2014. Collaboration with Dr. Adhika Widyaparaga.
Raditya Noverdi (TM 10)
Studi Visualisasi Pola Aliran Dua Fase Air-Udara Pada Pipa Mini Horizontal, Completed, August 2014. Collaboration with Prof Indarto and Dr. Deendarlianto.